BMW X2 (U10): Engines & technical data

BMW X2 sDrive20i: Fuel consumption, combined WLTP in l/100 km: 6.2–5.7; CO2 emissions, combined WLTP in g/km: 139–128

TECHNICAL DATA FOR THE BMW X2.

¹
Fuel type	Diesel
System power in kW (PS)	110 (150)
Max. Torque (Nm)	360
Gearbox	7-speed, automatic
Drive Type	front wheel drive

¹
Cylinder/ Valves per cylinder	4
Technical capacity in cm3	1,995
Engine power in kw(PS) per 1/min	110 (150) / 3,750 - 4,000
Max torque(Nm) per 1/min	360 / 1,500 - 2,500


Acceleration	8.9
Top Speed	210

^{1 ,}²
Combined in l/100km	5.5–5.1
Combined in g/km	143–133
Pass-by noise in dB(A)	67
Stationary noise level in dB(A) / 1/min	74 / 3,000


4,554 mm
1,845 mm
1,590 mm
Length	4,554
Width	1,845
Height	1,590
Width incl. mirrors (driver / passenger side) in mm	- (- / -)
Wheelbase in mm/Wheel turn in m	2,692
Weight Not Loaded ³	1,675
Weight Max in kg	2,170
Optionally delivered with support for trailer load, braked, up to 12%/towbar download in kg ⁴	- / 80
Trunk capacity min.-max. in l	560–1,470
Tank capacity in l	54

¹
Fuel type	Petrol – 48 Volt Mild-Hybrid
System power in kW (PS)	125 (170) ⁵
Max. Torque (Nm)	280 ⁵
Gearbox	7-speed, automatic
Drive Type	front wheel drive

¹
Cylinder/ Valves per cylinder	3
Technical capacity in cm3	1,499
Engine power in kw(PS) per 1/min	115 (156) / 4,700 - 6,500
Max torque(Nm) per 1/min	240 / 1,500 - 4,400


(Nominal) power/30 minutes power in kW (hp)	15 (20) / -
(Nominal) torque in Nm	55


Acceleration	8.3
Top Speed	213

^{1 ,}²
Combined in l/100km	6.2–5.7
Combined in g/km	139–128
Pass-by noise in dB(A)	66
Stationary noise level in dB(A) / 1/min	72 / 3,750

⁶
Battery capacity	0.9


4,554 mm
1,845 mm
1,590 mm
Length	4,554
Width	1,845
Height	1,590
Width incl. mirrors (driver / passenger side) in mm	2,104 (1,055 / 1,049)
Wheelbase in mm/Wheel turn in m	2,692
Weight Not Loaded ³	1,645
Weight Max in kg	2,150
Permitted load in kg	580
Optionally delivered with support for trailer load, braked, up to 12%/towbar download in kg ⁴	1,800 / 80
Trunk capacity min.-max. in l	515–1,400
Tank capacity in l	54

¹
Fuel type	Petrol
System power in kW (PS)	221 (300)
Max. Torque (Nm)	400
Gearbox	7-speed, automatic
Drive Type	all wheel drive

¹
Cylinder/ Valves per cylinder	4
Technical capacity in cm3	1,998
Engine power in kw(PS) per 1/min	221 (300) / 5,750 - 6,500
Max torque(Nm) per 1/min	400 / 2,000 - 4,500


Acceleration	5.4
Top Speed	250

^{1 ,}²
Combined in l/100km	8.1–7.7
Combined in g/km	184–175
Pass-by noise in dB(A)	67
Stationary noise level in dB(A) / 1/min	76 / 3,750


4,567 mm
1,845 mm
1,575 mm
Length	4,567
Width	1,845
Height	1,575
Width incl. mirrors (driver / passenger side) in mm	2,104 (1,055 / 1,049)
Wheelbase in mm/Wheel turn in m	2,692
Weight Not Loaded ³	1,770
Weight Max in kg	2,270
Permitted load in kg	575
Trunk capacity min.-max. in l	560–1,470
Tank capacity in l	54

1 Performance data of petrol engines apply to vehicles using RON 98 fuel. Fuel consumption data apply to vehicles using reference fuels in accordance with EU Regulation 715/2007. Unleaded RON 91 and higher with a maximum ethanol content of 10% (E10) may also be used. BMW recommends RON 95 fuel. For high-performance automobiles, BMW recommends RON 98 fuel.

2 Official data for fuel consumption, CO2 emissions, power consumption and electric range was determined in accordance with the prescribed measuring procedure and corresponds to European Regulation (EC) 715/2007 in the applicable version. For ranges, data determined as per WLTP takes into account any optional equipment (available on the German market in this case). For vehicles that have been newly type approved since 1 January 2021, only the official data according to WLTP exists. For more information about NEDC and WLTP measuring procedures visit www.bmw.com/wltp

3 The EC unladen weight refers to a vehicle with standard equipment and does not include any optional extras. The unladen weight includes a 90% full tank and a driver weight of 75 kg. Optional equipment may affect the weight of the vehicle, the payload and the top speed if the selected equipment has an impact on the vehicle's aerodynamics.

4 Trailer load depends on the vehicle options

5 Composed of combustion engine drive (specified nominal value) and electric drive (up to specified nominal value).

6 The charging performance depends on the state of charge, ambient temperature, individual driving profile and use of auxiliary consumers. The ranges shown are based on the WLTP best case. The charging times apply to ambient temperatures of 23 degrees Celsius after a preceding drive and may differ depending on the usage behaviour.

Fuel consumption and CO2 emissions.

BMW X2 sDrive20i: Fuel consumption, combined WLTP in l/100 km: 6.2–5.7; CO2 emissions, combined WLTP in g/km: 139–128

The illustrations show optional equipment.

The figures for performance, consumption and CO2 emissions refer to vehicles with standard transmission. Values in square brackets apply to vehicles with automatic transmission.

Further information about fuel consumption and official model-specific CO2 emissions of new passenger cars can be found in the "Guideline for fuel consumption, CO2 emissions and electric power consumption for new passenger cars", available free of charge at all points of sale, at the Deutsche Automobil Treuhand GmbH (DAT), Hellmuth-Hirth-Str. 1, 73760 Ostfildern-Scharnhausen, Germany, and under https://www.dat.de/co2/.
^[7]Composed of combustion engine drive 115 kW and electric drive up to 14 kW.

Shop Online

Service & Maintenance

ACCESORIES

Digital Services & Apps

BMW GROUP

Concept Cars

Website currently not fully available

X2

THE BMW X2.

TECHNICAL DATA FOR THE BMW X2.

Fuel consumption and CO2 emissions.